Remove hinge pin and insert it through spring as shown. IMPORTANT: Make sure spring legs are positioned BELOW the coil body!
IMPORTANT: Make sure spring legs are positioned BELOW the coil body!
Insert either spring leg only HALF WAY into the hole of the E-Z Hook™. Carefully pull spring legs back, GREATER THAN 180º , and hook together. Study illustrations carefully! Caution: spring can bite!
Carefully pull spring legs back, GREATER THAN 180º , and hook together. Study illustrations carefully!
Caution: spring can bite!
Lubricate pin for best results. Facing hinge plates, insert pin into hinge until fully seated. Pinch spring legs, pull off E-Z Hook™ and slowly release legs against door. Repeat steps 1-2-3 for other hinges as required.
Facing hinge plates, insert pin into hinge until fully seated.
Pinch spring legs, pull off E-Z Hook™ and slowly release legs against door.
Repeat steps 1-2-3 for other hinges as required.
Congratulations! Your door will now remain open - Automatically!
