Print

Installation Instructions

Installation Instructions

Installation Instructions

Simple 1-2-3 Installation

CautionTriangleSmall

Warning: Wear Safety Glasses to Avoid Eye Injury.
Read Instructions Completely Before Installing.
1 Remove Hinge Pin - Position Spring on Pin
Remove hinge pin and insert it through spring as shown.

IMPORTANT: Make sure spring legs are positioned BELOW the coil body!

step-one-image-only

 2 Carefully Tension SwingBack™ - Hook Legs
Insert either spring leg only HALF WAY into the hole of the E-Z Hook™.

Carefully pull spring legs back, GREATER THAN 180º , and hook together. Study illustrations carefully!

CautionTriangleSmall

Caution: spring can bite!

step-two-image-only

 

3 Replace Hinge Pin - Release Spring Tension
Lubricate pin for best results.

Facing hinge plates, insert pin into hinge until fully seated.

Pinch spring legs, pull off E-Z Hook™  and slowly release legs against door.

Repeat steps 1-2-3 for other hinges as required.

step-three-image-only

 

Congratulations! Your door will now remain open - Automatically!  

ordernow